EVCO EVXV215N7 User Manual
Page 9
EVCO S.p.A.
This document belongs to EVCO; unless you are authorized by EVCO, you can not publish this document.
Via Mezzaterra 6, 32036 Sedico Belluno ITALY
EVCO does not take any responsibility about features, technical data and possible mistakes related in this document.
Phone +39-0437-852468 • Fax +39-0437-83648
EVCO does not take any responsibility about damages coming by the non-observance of additional information.
[email protected] • www.evco.it
EVCO reserves the right to make any change without prior notice and at any time without prejudice the basic safety and operating features.
EVCO S.p.A. • Code 104X201E314 • page 9/9
13.4 EVXV204, EVXV214, EVXV205 and EVXV215 electrical wiring
13.5 Electrical wiring warnings
• do not use electric or pneumatic screwers on the terminal boards
• if the instrument was brought from a cold place to a hot one, humidity may condense inside the instrument; wait approximately one hour before switching on the power
• make sure that the power tension, frequency, and the electric operating power of the instrument are compatible with the those of the local power voltage
• disconnect the power before performing any type of maintenance operation
• do not use the instrument as a safety device
• for information about the instrument and repairs contact a member of the EVCO sales network