Comtrol IO-Link Master EIP-4 - Manual (Page 52)

52 - Chapter 3. EtherNet/IP CIP Object Definitions IO-Link Master EtherNet/IP Reference Manual: 2000589 Rev. A
TCP Object (F5 hex-1 instance)
3.9. TCP Object (F5 hex-1 instance)
The TCP/IP Interface Object provides the mechanism to retrieve the TCP/IP attributes for the IO-Link
Master.
3.9.1. Class Attributes
This table shows the Class Attributes for the TCP Object (F5 hex - I Instance).
3.9.2. Instance Attributes
This table shows the Instance Attributes for the TCP Object (F5 hex - I Instance).
Attribute ID Name Data Type Data Value Access Rule
1 Revision UINT 1 Get
2 Max Instance UINT 1 Get
3 Num Instances UINT 1 Get
4 Optional Attribute List UINT 4 Get
6
Maximum Number
Class Attribute
UINT 7 Get
7
Maximum Number
Instance Attribute
UINT 9 Get
Attribute ID Name Data Type Data Value(s) Access Rule
1 Status DWORD
0 = The Interface Configuration
attribute has not been
configured.
1 = The Interface Configuration
attribute contains
configuration obtained from
DHCP or nonvolatile
storage.
2 = The IP address member of
the Interface Configuration
attribute contains
configuration obtained, in
part, from the hardware
rotary switch settings.
• Upper 3 bytes from
nonvolatile storage.
• Least significant byte
from rotary switches.
Get
2
Configuration
Capability
DWORD
34 hex
(DHCP, Settable and Hardware)
04 hex = DHCP
10 hex = Settable
20 hex = Hardware configurable
Get