Comtrol IOLM 4-EIP - Manual (Page 31)

IO-Link Master 4-EIP User Guide: 2000582 Rev. A Chapter 5. IO-Link Port Configuration - 31
Chapter 5. IO-Link Port Configuration
This section discusses port configuration, which includes these topics:
• 5.1. IO-Link Settings Configuration Page
• 5.2. EtherNet/IP Settings Configuration Page on Page 33
• 5.3. Modbus/TCP Settings Configuration Page on Page 40
Depending on your needs, the IO-Link Master you may not to change many of the default options.
You may want to refer to the following Reference Manuals for additional information. The IO-Link Master
Reference Manuals also contain information about using the sample programs.
• IO-Link Master EtherNet/IP Reference Manual
• IO-Link Master Modbus/TCP Reference Manual
Note: The IO-Link Master may work out of the box for ControlLogix PLCs.
5.1. IO-Link Settings Configuration Page
Use the IO-Link Settings page to configure IO-Link port characteristics for the IO-Link Master.