6f,8a0,802, Toshiba, 1 location – Toshiba LF470 User Manual
Page 13
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
TOSHIBA
6
f,
8
A
0
,
802
,
I
I
I I
i
I I
I
4.1 Location
To select the installation site, follow the precautions described below:
■ Avoid places where fluid runs in a pulsating form.
■ Avoid places within the immediate proximity of equipment producing electrical
interference (such as motors, transformers, radio transmitters, electrolytic cells, or
other equipment causing electromagnetic or electrostatic interference).
■ Avoid places where excessive pipe vibration occurs.
■ Avoid places where there is direct sunlight. If this is unavoidable, use an appropriate
shade
■ Avoid places where corrosive atmospheres or high humidity conditions obtain.
■ Avoid places of too great an elevation or constricted areas where clearance
for installation or maintenance work is not provided.
■ Design piping so that the detector pipe is always filled with fluid, whether the fluid is
flowing or not.
■ The LF470 detector has no adjustable piping mechanism. Install an adjustable short
pipe where needed.
■ Chemical injections should be conducted on the downstream side of the flowmeter.
- 1 2 -