Toshiba IK-DP20A - Manual (Page 15)

The sharpness can be controlled from 0-15, with 15 being the sharpest.
To change the SHARPNESS:
1. Enter 95 preset to access the main menu.
2. Position the cursor (^) next to CAMERA SETUP and press the OPEN button to
access the Camera menu.
3. Position the cursor next to SHARPNESS and press the OPEN button to move the
cursor to the right.
4. Move the joystick up or down to select the sharpness level.
5. To accept the selection, press the OPEN button or to cancel the selection, press
the CLOSE button.
6.4.6 LINE LOCK CONTROL
The dome camera can be synchronized with the power supply frequency.
Menu
- Line Lock can be set to ON or OFF
- The Line Lock Phase can be set from 0 200 degrees.
MAIN MENU CAMERA MENU LINE LOCK
To change the LINE LOCK options:
1. Enter 95 preset to access the main menu.
2. Position the cursor (->■) next to CAMERA SETUP and press the OPEN button to
access the Camera menu.
3. Position the cursor next to LINE LOCK and press the OPEN button to access the
Line Lock menu.
4. Position the cursor next to the desired option and press the OPEN button to move
the cursor to the right.
5. Move the joystick up or down to select the option setting.
6. To accept the selection, press the OPEN button or to cancel the selection, press the
CLOSE button.
-
14
-