Energy star® user information – Toshiba 19SL410U User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
2) Remove the four screws shown in the below diagram.
This will allow removal of the pedestal stand.
3) Once you have removed the four screws that hold the
pedestal stand in place, remove the pedestal stand
from the TV,
19” TV
VESA Mounting Pattern
Four screws
"—Hook
Sturdy strap
(as short as possible)
24” TV
VESA Mounting Pattern
A
Four screws
32” TV
"Hook
Sturdy strap
(as short as possible)
VESA Mounting Pattern
Four screws
^ Hook
Sturdy strap
(as short as possible)
FCC Declaration of Conformity
Compliance Statement (Part 15):
The
Toshiba 19SL410U, 24SL410U, and 32SL410U
Televisions
comply with Part 15 of the FCC rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
and
(2) This device must accept any interference
received, including interference that may cause
undesired operation.
The party responsible for compliance to these rules
is:
Toshiba America Information Systems, Inc.
9740 Irvine Blvd.; Irvine, CA 92618
Ph: 1-800-631-3811
Note: This equipment has been tested and
found to compiy with the iimits for a Ciass B
digitai device, pursuant to Part 15 of the FCC
ruies. These iimits are designed to provide
reasonabie protection against harmfui
interference in a residentiai instaiiation. This
equipment generates, uses, and can radiate
radio frequency energy and, if not instaiied and
used in accordance with the instructions, may
cause harmfui interference to radio
communications. However, there is no
guarantee that interference will not occur in a
particuiar instaiiation. if this equipment does
cause harmfui interference to radio or television
reception, which can be determined by removing
and appiying power to the equipment, the user is
encouraged to try to correct the interference by
one or more of the foiiowing measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
the receiver.
• Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected.
• Con,sult the dealer or an experienced radio/TV
technician for help.
Caution: Changes or modifications to this
equipment not expressiy approved by Toshiba
couid void the user’s authority to operate this
equipment
ENERGY STAR® User Information
ENERGY STAR User Information Statement; the
factory default settings of this television meet
ENERGY STAR requirements. Changing Picture
Settings may increase energy consumption, possibly
beyond the limits required for ENERGY STAR
qualification.
To en.sure your television is operating at optimal
energy efficiency, select [Home] mode during initial
activation.