Toshiba 19SL410U - Manual (Page 38)

Chapter 6: Using the TV's features
You can also use the CC Selector to select digital
closed caption services (if available). When such
services are not available, the CC Selector presents a
default list of services.
To select closed captions:
1 Press and open the Preferences menu.
2 Highlight CC Selector and press ( e ^.
3 Press A or T to select Closed Caption, and then
press or ► to select the desired service.
4 Press "gV
Adjusting the audio
Muting the sound
Press
I
MUTE t on the remote control to partially reduce
(1/2 MUTE) or turn off (MUTE) the sound. Each
time you press
I mute j. the mute mode will change in
the following order:
1/2 Mute - - Mute Volume -
Tf the closed caption mode is set to Off when you
select “MUTE” mode, the closed caption feature is
automatically activated if the TV program is Closed
Captioned. To mute the audio without automatically
activating the closed caption feature, use to set
the volume to 0. See "Using the closed caption mode"
(o^ page 37) for more information on closed caption
modes.
Using the digital audio selector
You can use the Digital Audio Selector to
conveniently switch between audio tracks on a digital
channel (for those channels that have multiple audio
tracks). This temporarily overrides the audio track
chosen by the language option under
Audio Setup ( d ®"
"Selecting stereo/SAP broadcasts" on page 38).
To use the digital audio selector:
1
Press “ q “ and open the Sound menu.
38
2 Highlight Digital Audio Selector and press
3 Press A or ▼ to select Audio, and then press or
► to select the desired service.
Press
o ■
Selecting stereo/SAP broadcasts
The multi-channel TV sound (MTS) feature allows
you to output high-fidelity stereo sound. MTS also
can transmit a second audio program (SAP)
containing a second language, music, or other audio
information (when provided by individual stations).
When the TV receives a stereo or SAP broadcast, the
word “STEREO” or “SAP” appears on-screen when
[ RECALL} is pressed.The MTS feature is only available
for analog signals on the ANT/CABLE input.
To listen to stereo sound:
1 Pres.s “ q “ and open the Sound menu.
2 Highlight Audio Setup and pre.s.s (Q.
3 In the MTS field, seleet Stereo.
4 To save the new setting.s, highlight Done and pres.s
To reset the settings to the factory defaults,
highlight Reset and press ( e ^.
Note:
• You can typically leave the TV in Stereo mode
because it will automatically output the type of
sound being broadcast (stereo or monaural).
• If the stereo sound is noisy, select Mono to
reduce the noise.
To listen to an alternate language on an
ATSC digital station (if available):
Highlight the Language field in step 3 above, and
then press M or ► to seleet the language you prefer.
To listen to a second audio program on an
analog station (if available):
Select SAP in step 3 above.