Toshiba 19SL410U - Manual (Page 36)

Chapter 6: Using the TV's features
Using the FREEZE feature
To use the FREEZE feature:
When viewing the TV, press to make the
picture a still picture.
To return to the moving picture, press r □
1
2
again (or any other button).
Note: If the TV is left in FREEZE mode for more
than 15 minutes, the FREEZE mode will
automatically be released and the TV will return
to moving picture.
Using the FREEZE function for any purpose
other than your private viewing may be
prohibited under the Copyright Laws of the
United States and other countries, and may
subject you to civil and criminal liability.
Adjusting the picture
Selecting the picture mode
You can select your desired picture settings from four
different modes, as described below.
Mode Picture Quality
Sports
Bright and dynamic picture (factory
setting)
Standard
Standard picture settings (factory
setting)
Movie
Lower contra.st for darkened room
(factory setting)
PC
Designed for viewing of PC tables
and documents
Preference Your personal preferences
Note: PC mode is available for HDMI and PC
inputs only (grayed out for other input sources).
To select the picture mode using the menu
system:
1
Press and open the Picture menu.
2 Highlight Mode and press
36
3 Press A or ▼ to select the picture mode yon
prefer andprc"-'
Adjusting the picture quality
Yon can adjn.st the picture quality (Contrast,
Backlight, DynaLight™, Brightness, Color, Tint, and
Sharpness) to your personal preferences.
Selection Pressing
<
Pressing ^
Contra.st lower higher
Backlight* darker lighter
DynaLight* * On/Off On/Off
Brightness darker lighter
Color paler deeper
Tint reddish greenish
Sharpness softer sharper
‘Backlight
This feature adjusts the brightness of the entire
screen.
“DynaLight
This function automatically strengthens the black
coloring of dark areas in the video according to the
level of darkness.
To adjust the picture quality:
1
2
3
Press and open the Picture menu.
Highlight Picture Settings and press ffi)
Press A or ▼ to select the picture quality yon
want to adjust (Contrast, Backlight, DynaLight,
Brightness, Color, Tint, or Sharpness), and then
press or ► to adjn.st the setting, as described in
the table above.
4 To save the new settings, highlight Done and press
(Q). Yon can n.se any of the picture modes ( ks "
"Selecting the picture mode" on the left) as a
starting point for adjusting the picture settings.
To revert back to the base mode that yon began
adjusting the picture settings from, highlight
Reset and press
The picture qualities yon adjusted are automatically
saved in the Preference mode (i@’ "Selecting the
picture mode" on the left) until Reset is selected.