Toshiba 19SL410U - Manual (Page 14)

Chapter 2: Connecting your TV
Connecting a VCR and antenna, Cable TV or Camcorder
Camcorder
TV back panel
You will need:
• Coaxial cables
• Standard A/V cables
- If you have a mono VCR, connect L/MONO
on the TV to your VCR’s audio out terminal
using the white audio cable only.
• Standard audio cables (If you have a mono VCR)
Note: When you use a Cable box, you may not
be able to use the remote control to program or
access certain features on the TV.
To view the antenna or Cable signal:
Select the
ANT/CABLE
video input souree on the TV*
To view basic and premium Cable channels:
Turn OFF the VCR. Seleet the
ANT/CABLE
video
input source on the TV.* Tune the TV to channel 3 or
4 (whichever channel the Cable box output is set to).
Use the Cable box controls to change channels.
14
To view the VCR:
Turn ON the VCR. Seleet the
Video
video input
souree on the TV*
To view the camcorder video:
Select the
Video
video input source on the TV*
* To select the video input source, press
remote control (oaf page 21).
I on the
The unauthorized recording, use, distribution, or revision
of teievision programs, videotapes, DVDs, and other
materiais is prohibited under the Copyright Laws of the
United Slates and other countries, and may subject you
to civii and criminai iiabiiity._________________________