Toshiba 19SL410U - Manual (Page 15)

Chapter 2: Connecting your TV
Connecting a DVD player with ColorStream® (component video), a VCR, or
a satellite receiver
From
antenna
Component video cable
Satellite receiver with component
video or DVD player with
component video
—№
From satellite dish
You will need:
• Coaxial cables
• Standard A/V cables
- If you have a mono VCR, connect L/MONO
on the TV to your VCR’s audio out terminal
using the white audio cable only.
• Standard audio cables
• Component video cables
- You can connect the component video
cables (plus audio cables) from the DVD
player or satellite receiver to the
ColorStream HD terminals (Y, PB, and PR)
on the TV. The ColorStream HD terminals
can be used with Progressive (480p, 720p)
and Interlaced (480i, 1080i) scan systems. A
1080i signal will provide the best picture
performance (1080p is not supported).
- If your DVD player or satellite receiver does
not have component video, connect a
standard A/V cable to VIDEO on the back
panel. If your DVD player has HDMI video,
see page 16.
To view antenna or Cable channels:
Select the ANT/CABLE video input souree on the TV.*
Standard A/V cables
To view the DVD player:
Turn ON the DVD player. Select the
ColorStream HD
video input souree on the TV*
To view satellite programs using the
component video connections:
Turn on the satellite reeeiver. Select the
ColorStream
HD
video input souree on the TV*
To view the VCR or \iew and record antenna
channels:
Turn ON the VCR. Tune the VCR to the ehannel you
want to wateh. Seleet the
Video
video input souree on
the TV*
To record a TV program while watching a
DVD:
Turn ON the VCR. Tune the VCR to the ehannel to
reeord.
* To select the video input source, press
remote control (cs’ page 21).
I on the
The unauthorized recording, use, distribution, or revision
of teievision programs, videotapes, DVDs, and other
materiais is prohibited under the Copyright Laws of the
United Slates and other countries, and may subject you
to civii and criminai iiabiiity._________________________
15