Toshiba 19SL410U - Manual (Page 20)

Installing the remote control
batteries
1
Remove the battery eover from the baek of the
remote control.
Squeeze tab and p
lift cover. ■ lii
3
2
Install two “AAA” size batteries, making sure to
mateh the + and - signs on the batteries to the
signs on the battery eompartment.
3
Reinsert the battery eover in the remote eontrol
until the tab snaps.
Caution: Batteries must not be exposed to
excessive heat such as sunshine, fire, or the
like.
Note:
• Be sure to use AAA size batteries.
• Dispose of batteries in a designated disposai
area.
• Batteries should always be disposed of with the
environment in mind. Always dispose of
batteries in accordance with applicable laws
and regulations.
• If the remote control does not operate correctly,
or if the operating range becomes reduced,
replace batteries with new ones.
• When necessary to replace batteries in the
remote control, always replace both batteries
with new ones. Never mix battery types or use
new and used batteries in combination.
• Always remove batteries from the remote
control if they are dead or if the remote control
is not to be used for an extended period of
time. This will prevent battery acid from leaking
into the battery compartment
20
Remote control effective range
For optimum performance, aim the remote control
directly at the TV and make sure there is no
obstruction between the remote control and the TV.
Point remote control toward
remote sensor on front of TV.
16.4 ft (5m)
Adjusting the viewing angle
For the 19SL410U and 24SL410U models, you can
adju.st the tilt angle of the LCD screen for better
viewing comfort.
2 “
...e
;lf
' q-