Rca dss® satellite receiver, Hooking up the vcr – RCA VR725HF User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Hooking Up the VCR
RCA DSS® Satellite Receiver
B. Advanced hookup with
Q
basic receiver.
Use this hookup if your TV has audio/video |
jacks and your receiver has one set of
S
AUDIO/VIDEO jacks.
I
I
1. Set the CH3 CH4 switch on back of
}
receiver to either channel 3 or 4.
|
You will tune the VCR to this channel to record
from the satellite receiver.
To watch the satellite receiver, tune your TV to
its video input channel.
If you want to watch or record the signal from
your antenna, cable, or cable box, make sure the
satellite receiver is turned off.
2. Set the CH3 CH4 switch on back of VCR
to either channel 3 or 4.
You will tune the TV to this channel and use the
TV*VCR button to watch the VCR.
3. Connect as shown.
This connection may require additional
accessories not provided.
4. Plug in power cords of VCR, TV, and
receiver.
From
Cable, Cable Box
or Antenna
From
Satellite
Dish
5.
Continue to page 10.
Back of Satellite Receiver
C. Advanced hookup with
deluxe receiver.
Use this hookup if your TV has audio/video
jacks and your receiver has two sets of
AUDIOA/I DEO jacks.
1. Set the CH3 CH4 switch on back of VCR
to either channel 3 or 4.
You will tune the TV to this channel and use the
TV*VCR button to watch the VCR.
To record from the satellite receiver, you will
tune the VCR to its line input
(LI).
To watch the satellite receiver, tune your TV to
its video input channel.
2. Connect as shown.
This connection may require additional
accessories not provided.
3. Plug in power cords of VCR, TV, and
receiver.
Continue to page 10.
Caution: The unauthorized recording
of satellite broadcasts, television
programs, or other materials may
infringe the rights of others.
□
From
Cable, Cable Box
From
Satellite
Dish