Position cable box, A. basic hookup, Connect as shown – RCA VR725HF User Manual
Page 6: Plug in power cords of vcr, tv, and cable box, Advanced hookup, Hooking up the vcr
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Hooking Up the VCR
Cable System With Cable Box to Unscramble All Channels
Position Cable Box
Position the remote-controllable cable box on
top of the VCR. You may need to position it
at different angles before the VCR can
control it. Make sure the cable box does not
cover the transmitting window on top of the
VCR.
A. Basic hookup.
Use this hookup for a simple connection
which requires fewer accessories.
1. Set the 3
CH. 4
switch on back of VCR to
either channel 3 or 4.
Tune the TV to this channel and use the
TV*VCR button to watch the VCR.
2. Connect as shown.
This connection may require additional
accessories not provided.
3. Plug in power cords of VCR, TV, and
cable box.
4.
Continue to page 10.
B. Advanced hookup.
Use this hookup for slightly improved
picture quality and more convenient
operation — use of the TV*VCR button is
not required.
1. Connect as shown.
This connection requires additional accessories
not provided,
2. Plug in power cords of VCR, TV, and
cable box.
If your TV/monitor has an S-VIDEO connector,
also connect the supplied S-VHS cable to take
advantage of S-VHS.
If your TV is not stereo, you may need a
Y-adapter to hear sound from both channels.
Continue to page 10.
Tunc the TV to its video input to watch
the VCR. Set the AUTO TV/VCR feature to
OFF.
See page 12 for details.
Caution: The unauthorized recording
of satellite broadcasts, television
programs, or other materials may
infringe the rights of others.
Back of VCR
□
Cable Box