Antenna or cable system without a cable box, A. basic hookup, Connect as shown – RCA VR725HF User Manual
Page 5: Plug in power cords of vcr and tv, Back of vcr, Back of tv, B. advanced hookup, Hooking up the vcr
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Hooking Up the VCR
Antenna or Cable System Without a Cable Box
□
A. Basic hookup.
Use this hookup for a simple connection
which requires fewer accessories.
1. Set the 3 CH. 4 switch on back of VCR to
either channel 3 or 4.
Tune the TV to this channel and use the
TV*VCR button to watch the VCR.
2. Connect as shown.
This connection may require additional
accessories not provided.
3. Plug in power cords of VCR and TV.
4.
Continue to page 10.
From Antenna
or Cable
RF Coaxial Cable
(supplied)
Back of VCR
Back of TV
B. Advanced hookup.
Use this hookup for slightly improved
picture quality and more convenient
operation — use of the TV*VCR button is
not required.
1. Connect as shown.
This connection requires additional accessories
not provided.
If your TV/monitor has an S-VIDEO connector,
also connect the supplied S-VHS cable to take
advantage of S-VHS.
If your TV is not stereo, you may need a
Y-adapter to hear sound from both channels.
2. Plug in power cords of VCR and TV.
3.
Continue to page 10.
Tune the 1 V to its video input to watch the
VCR. Set the AUTO TV/VCR feature to OFF.
See page 12 for details.
Q