Controlling a cable box or an rca dss® receiver, Program the remote, Operate the cable box or satellite receiver – RCA VR725HF User Manual
Page 20: Using the remote control
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Using the Remote Control
Controlling a Cable Box or an RCA DSS® Receiver
Tht; CABLE button on the VCR's remote is preprogrammed to control either a compatible
RCA cable box or satellite receiver. If your cable box is another manufacturer's brand and
has its own remote, you will probably be able to program the VCR's remote to control your
cable box. To program the VCR's remote, enter the code that corresponds to your brand.
Program the remote
1. Turn on the cable box.
2. Point the VCR remote at the
cable box.
3. Hold the CABLE button and
press two number buttons to
enter the code for your brand.
4. Release the buttons.
5. Press POWER on the remote.
If the cable box turns off,
setup is complete.
6. Repeat steps 2-4 with a
different code if the first one
does not work.
Brand of Cable-TV Box or RCA DSS®
Code Number(s)
ABC
53,54
Anvision
07,08
Cablestar
56
Diamond
07,08
Eagle
07,08
Eastern International
02
General Instrument
04, 05,15, 23, 24, 25, 30, 36
Hamlin
12,13, 34,48
Hitachi
37,43
Jerrold
04, 05,15, 23, 24, 25,30, 36, 45,46,47
Macom
37,43
Magnavox
07, 08,19, 26, 28, 29, 32, 33,40,41
NSC
09
Oak
01,16,38
Oak Sigma
16
Panasonic
03,27, 39
Philips
07, 08,19, 26, 28, 29, 32, 33,40,41
Pioneer
18,20,44
Randtek
07,08
RCA
60,27
RCA DSS®
00
Regal
12,13
Regency
02,33
Samsung
44
Scientific Atlanta
03, 22, 35
Stargete2000
58
Sylvania
11,59
Teknika
06
Texscan
10,11,59
Tocom
17,21,49,50, 55
Unika
31,32, 41
Universal
51, 52
Viewstar
07, 08,19, 26, 28, 29, 32, 33,40, 41
Warner Amex
44
Zenith
14,42, 57
The remote may not be able to control every cable box of the
brands listed.
Operate the Cable Box or Satellite Receiver
After you set up your remote (if required) to control your cable box, test the buttons to see
which ones operate your cable box or satellite receiver.
1. Point the remote at the cable
box or satellite receiver and press CABLE.
2. If the cable box or receiver does not turn on in step 1, press CABLE, then POWER.
3. Use the "Cable Box or RCA Digital Satellite Receiver Function Buttons" for the cable box
and test the "TV Function Buttons" to see which ones operate the satellite receiver.
See page 15.
*
*DSS® is a registered trademark of DIRECTV, Inc., a unit of GM Hughes Electronics.
18