RCA VR725HF - Manual (Page 32)

Recording a Program
Express Recording
lixpress recording lets you record up to four hours without using the timer program leature. Ihe VCK
turns off automatically at the end of the recording.
Display showing 30 minutes remaining
Operating Instructions
1. Turn on the VCR.
2. Insert a tape with its safety tab in place.
3. Select the channel you want to record.
4. Select the desired recording speed using SPEED on the remote.
5. Press REC on remote or RECORD on the VCR to activate
the recording.
6. Press RECORD or REC repeatedly until the amount of rci o
time for the program is displayed in the VCR's display paiii
on the TV screen.
Each press of RECORD or REC increases the time —
30 minutes up to 4 hours.
R E C O R D L E N G T H 0 : 0 0
C H 0 4
Press
RECORD
Recording Display on
TV Screen
0:30
I
1:00
I
1:30
I
2:00
I
3:00
I
4:00
I
0:00
Recording
Time
(30 Min)
(1 Hr)
(1 Hr, 30 Min)
(2 Hrs)
(3 Hrs)
(4 Hrs)
(Turns Off)
The amount of time the VCR will record and the
record (laic)) the playback (►) and the time (
)
indicators appear in the VCR's display panel.
During recording, press RECORD on the VCR or
REC on the remote to display the time remaining
on the TV screen. Press RECORD or REC again to
increase the recording time.
Stopping an Express Recording in Progress
With the VCR: Press POWER and then
STOP*EJECT within a few seconds.
With the Remote: Press VCR1 (VCR2»LD) and then
STOP within a few seconds.
30