RCA VR725HF - Manual (Page 17)

Using the Remote Control
Buttons
VCR Function Buttons
(continued)
PAUSE
Pauses action for viewing during
playback.
Pauses recording to prevent
recording of unwanted scenes.
PLAY
Plays a tape.
POWER
Turns off VCR when remote is set
to control the VCR.
PREV CH (Previous Channel)
Switches between two channels.
Select one channel and then select
another. Press PREV CH to
switch between the two channels.
REC
Starts VCR recording.
Used for express recording.
See page 30.
TV Function Buttons
Press the TV button to set remote to control a compatible TV. Some buttons may not work with the TV.
REW (Rewind)
Rewinds the tape when the VCK
is stopped.
Searches the picture in reverse
motion during playback.
SEARCH
Displays INDEX, ZERO, and
BLANK search menus on TV.
Advances tape 60 seconds during
playback.
SLOW - / +
Used for slow-motion playback.
SPEED (Tape Speed)
Selects a recording speed
(SP, LP, SLP).
STOP
Stops the normai luncUoiis such
as record, playback, rewind, fast
forward, and pause of the VCR.
TRACKING Up or Down
Lets you manually reduce the
streaks that may appear on the
picture during play, slow, or
pause.
Reduces picture "jitter" during
stop-action playback.
TV*VCR
Switches the picture signal so
that it either comes from the VCR
or the TV channel. See page 12.
CHAN (Channel) Up or Down
Selects next higher or lower
channel in the TV's channel
memory when remote is set to
control a TV.
CLEAR
Removes menus from the screen.
DISPLAY
Shows the status displays on the
screen.
Removes displays from the
screen.
POWER
Turns off a compatible TV when
remote is set to control that TV.
Used with TV button to turn on a
compatible TV that the remote
has been programmed to control.
See page 17.
MUTE
Turns the TV sound on or off.
Numbers (0 through 9 )
Select a channel up to 99 by
pressing two numbers.
To select a cable channel over 99,
press and hold 1 until 1 — appears
on the screen. Then press the
other two numbers.
PREV CH (Previous Channel)
Switches between two channels.
Select one channel and then select
another. Press
PREV CH to
switch between the two channels.
VOL (Volume) Up or Down
Raises and lowers sound.
Cable Box or RCA DSS^ Receiver Function Buttons
Press the CABLE button to set remote to control a compatible cable box or RCA satellite receiver. Some buttons may not
work with the cable box or receiver.
Numbers (0 through 9 ) POWER
Used to select a channel. Turns off a compatible cable box
or satellite receiver when remote
is set to control it.
CHAN (Channel) Up or Down
Selects next higher or lower
channel in the cable box's or
satellite receiver's channel
memory when remote is set to
control it.
15