Toshiba TEC FDS-30 - Manual (Page 130)

EO-11032
■ Selective Itemtzer Functions and Applications
The “Selective Itemizer" is a temporary total memory for each sale and is activated separately from
the Main Itemizer (Le. sale total memory). If certain Department or PLU items are programmed with
the SI (selective itemizer) “net” status, the Selective itemizer will function to add up amounts of the
Sl-net-status items in registering the items, while the Main Itemizer will function to add up all the items
in the sale. Thus, near the sale finalization, the operator may read the SI content by depressing the
[SI/TL] key.
A preset % rate may be programmed for each of SI1 and S12 (on the previous page), and whether the
calculated amount will add to, subtract from, or non-affect the sale total is a selective option. Whether
the amount resulted by depressing the tSI/TL] key will print or non-print is another selective option.
The applications of this function may vary from store to store. Some stores may use it for counting
the service stamps to be issued to the customers according to the sale amount of service-stampable
items. In this case, the option “SI Total Non-affects Sale Total” should be selected, and a preset %
rate, 1% for example, may be set to issue one service stamp for every $1.00. Thus the number of
stamps to be issued to the customer is displayed (and printed if so programmed) as a result of
calculation with the preset % rate, but the resulted value (the number of stamps in this case) will not
affect the sale total.
Example 1) With option “SI Total Non-affects Sale Total”:
Key Operation in "REG" Mode Receiot/Journal Print
100 [DEPT 5] (Sl-net)
150 [DEPT 1] (non-Sl)
200 [DEPT 6] (Sl-net)
[SI/TL] (1% SI preset)
[AT/TL]
DAIRY
VEGETABLE
BAKERY
SIl TL
TAX
CASH
1.0T)1T
1.50TF
2.00TF
0.03
0,27
Sl-net Depts
Number of
Stamps to be
issued
Dept.5 and Dept.6 are programmed with Sl-net-status. On depressing [SI/TL], “0.03" (which
is 1% of total amount of Dept.5 “1.00” + Dept.6 “2.00”) is displayed and printed, and 3
stamps are to be issued to the customer in this case. The sale total “4.77" is not affected by
the SI calculation.
Other stores may use it for calculating the discount amount for certain sales items during a special
discount sales period by presetting the discount % rate on the SI and programming Sl-net-status to
certain Departments and PLUs which are subject to the special discount.
Example 2) With option “SI Special Discount”:
Key Operation in “REG" Mode Receiot/Journal Print
100 [DEPT 5] (Sl-net)
150 [DEPT 1] (non-Sl)
200 [DEPT 6] (Sl-net)
[SI/TL] (10% SI preset)
[AT/TL]
DAIRY l,00TF|-rSl-net Depts
VEGETABLE 1.50TF
BAKERY 2.00TF
SIl TL -0,30
TAX 0,27
CASH
[-Discount
^ Amount resulted
by Si % process
-64-