Toshiba TEC FDS-30 - Manual (Page 100)

E01-11032
DIRECT CHARACTER ENTRY METHOD
Using ECR Keyboard
- Setting Mode Key Layout
Character Keys
in programming Function Keys
in programming
QDC1DCZ)GDGDGDCDCDCD(ID!CDCID,CD0 BQOCEDCE)
mQCDaGDQamcDmaEioo aeeeaaee
QED0QQQ0QCDCDQCI]mQriCZEZ)CZ)00@@
CDQaGDCDGDQaaGD CDQ QDdD
OBCDCDCDCIXDCDraCD CDCD QDQD
GDSCDCDGDCDGDCDCIDCZ) CDCD CDCD
CDCDCDQDGDCIDCEDBGDaD GDO CDCD
(ZDCDCDi—lCDC:^
eGDQDCDLJcZ)
PLU
CDCDS
DflOC
Di_JCDr
CDCDCDi—JCDC^
Character Keys ; Simply depress the key to enter the character. (The [#J key should not be
followed.). The numerics 1 to 0 (characters in programming) are entered as
characters 1 to 0 but not as codes for Department Codes, etc.
The One Double-size Declaration (by depressing IX] key once prior to the
required character) and the All Double-size Declaration (by depression [X]
twice before the characters) are the same as in the CHARACTER CODE
ENTRY method.
Function Keys : These are function keys to be used in programming operations with the Setting
Mode Key Layout. The Numeric Keys here are used to enter Department
Codes, etc. or numeric values as program data, but not to enter the numerics
as characters.
- 3 4 -