Toshiba TEC FDS-30 - Manual (Page 107)

EOl-11032
NOTES : 1. Depress only the key(s) for the required status change(s). [RTN], [TXVM], [TX2/M],
[TX3/MJ, [SH/M], [S12/M], and [FS/M] keys will function to reverse from the current
status to the other.
2. For the name of each department, a maximum of 10 regular-sized or 5 double-sized
characters may be entered. A combination of both types is also available. If no name
is programmed for a department, the Department No. (ex. "DPOI") will be printed on
the receipt and reports as the Department name.
3. If only a department name is set or changed, refer to the following operation sequence.
3[X1 > I Peot Code I [DP#] Character Entries [ST]
to change the dept’s
name
-► [ATyTL]
Repeatable another dept to change only its name.
- 41 -