Toshiba TEC FDS-30 - Manual (Page 129)

EO-11032
PRESET RATE SETTING FOR SELECTIVE ITEMIZERS (Sil and SI2)
If any of [SI1/TL] (or {SI/TL]) and IS12/TLJ keys are installed on the keyboard, a preset rate may be
programmed on each key.
As to the functions and applications of the Selective Itemizers, refer to the description on the next
page.
Mode Lock: SET / GT Lock: Neutral
Preset S11 % Rate | [SI1/TL]
(or ISin-L])
(0.01 to 99.99(%); use the [.] key
if a decimal portion is contained.)
Preset SI 2 % Rate i [SI2/TL]
(On a Single-SI machine, only one Selective Itemizer Total Key is installed and labeled
as “[SI/TLJ”. On a dual-SI machine, two keys, labeled as “[SI1/TL]”and “[SI2/TL]",
are installed.)
NOTES: 1. Whether the calculated amount by the preset
SI % rate affects (i.e. add to or subtract from)
the sale total is determined by a program
option status selection.
2. To reset the rate once set, enter 0 as the rate.
(Then the rate is regarded as 100% if the
option “Non-affect” is selected. With the
option “SI Affects Sale Total”, some rate
other than “0” should be programmed.)
ex.) To set 7% as SI1 preset % rate:
Mode Lock to SET,
7 [Sn/TLj.
te : c STORE
1343 PEACH DRIVE
phone : 87-Ó437
Thank you
Call again
phone : 87-6437
09-21-90 #111101
F
SIl TL 7%
0072 14:09TM
- 63 -