Toshiba TEC MA-305-100 - Manual (Page 52)

EOl-11068
PLU Quantity Extension (Muitipiication):
When more than three or four items are to be entered with the same PLU item, the
Quantity Extension (multiplication) is quicker than the Repeat Entry.
Preset-price PLU
□.........□
Quantiy;
max. 6 digits
0.001 to 999.999
.
1
.
If an error occurs here:
Possible cause of error:
• Product exceeding 7 digite.
Check the Quantity.
□□□□□□□
3 digits for
integer (max.)
3 digits for
decimal (max.)
Required only for any
decimal portion entry.
ex.) 123: [1
23.4: 0 0 Q 4
0.234: ( 0 ) | T l 2 0 0
if an error occurs here:
Possible cause of error:
• Exceeding the digit limit
If an error occurs here:
Poss/b/e cause of error;
• Exceeding the LC of the link
Department
Check the Unit Price.
-*■ See Listing
Capacity Open.
• Product exceeding 7 digits.
Open-price PLU
^-1 t...... and L
PLU 1 -► □„ ®/FOR 1 AMT
max. 3 digits;
1 to 200
max. 6 digits
0.001 to 999.999
max. 6 digits
NOTES 1. The product obtained by Quantity Extension cannot be repeated.
2. The decimal portion of the Quantity entry is processed down to the 2 digits
below the decimal point. The fraction rounding at this time is fixed to ROUND
OFF.
3. You can select the rounding process of the fractions of the product (result of
multiplication) - ROUND OFF (initial setting), ROUND UP, or ROUND DOWN.
(Refer to Chapter *‘19. System Option Setting'* Address 2 - Bits 1 and 2.)
Receipt Print Format for PLU Quantity Extension
- 50 -