Sales memory clear, Operating procedure, Thank you call again – Toshiba TEC MA-305-100 User Manual
Page 121
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
EOI-11068
Sales Memory Clear
The operation defined as “Sales Memory Clear” will only clear the sales data accumulated in the
register’s memory (report memory). The programmed data will not be cleared. By operating a
Sales Memory Clear, all the sales data including non-resettable totals and counters, Reset Report
Counts, Receipt Consecutive No. are cleared.
Warning : This dear operation deletes all sales data stored in the register’s memory.
Operating Procedure
Condition;
Any time, outside or during any operation sequence except during Key Setting or
Key Location Changing (Chapter 15) an System Option Setting.
Operation:
Use the
S Key
to turn the
i
Depress the following Numeric Key according to the display and print format for zero
amount;
Numeric Key
Zero-amount
Format
s
0 0 0
•
Q]
0
•
for use in US or Canada
i
Depress the AT/T
l
I key.
A Sales Memory Clear receipt is issued.
Sales Memory Clear Symbol Line
(03 for Numeric 3, or 01 for Numeric 1)
Receipt Consecutive No. is reset
to 0001.
(Date, Register No., and Time remain
unreset)
Thank you
Call again
1 1,- 0 3, - 9 2
No 1 1 2.3 0 0
0 3
* 0.0 0
0 0 0.1
1 3 - 0 4
Zero-amount Display & Print
Format designated here.
NOTE: When a Sales Memory Clear is operated, the condition "after all sales data reset"
is obtained, just as "Status Clear” or "All Memory Clear”. Therefore, no Reset
Reports need to be taken for starting any programming operation.
- 1 1 9 -