Toshiba TEC MA-1600-100 - Manual (Page 142)

E 0 - 1102 <(
PRESET RATE SETTING FOR SELECTIVE ITEMIZERS (SI1 and SI2)
If any of [Sn/TLl (or iSl/TLJ) and [SI2/TL] keys are installed on the keyboard, a preset rate may be
programmed on each key.
As to the functions and applications of the Selective Itemizers, refer to the description on the next
page.
Any time, outside a sale
Mode Lock: SET / GT Lock: Neutral
I
Preset S11 % Rate
I
ISI1/TL]
(or ISl/TLJ)
(0.01 to 99.99(%); use the (.] key
if a decimal portion is contained.)
I
Preset SI 2 % Rate | [SiaTTL]
(On a Single-St mactiine, only one Selective Itemizer Total Key is installed and labeled
as ‘'(SI/TL]”. On a dual-SI machine, two keys, labeled as “[SI1/TL]”and “|SI2TL]”,
are installed.)
NOTES: 1. Whether the calculated amount by the preset
SI % rate affects (i.e. add to or subtract from)
the sale total is determined by a system option
status selection.
2. To reset the rate once set, enter 0 as tl)e rate.
(Then the rate is regarded as 100% if the
option “Non-affect” is selected. With the
option "St Affects Sate Total", some rate
other than "0” should be programmed.)
ex.) To set 7% as SI1 preset % rate:
Mode Lock to SET,
7 [SI1/TLJ.
TEC s t o r e :
1343 PEACH DRIVE
phone : 37-6437
Thank xou
Call a 9 ain
11-20-90 #0
Sn TL 7%
0067 ll:46TH
>
- 72 -