Toshiba TEC MA-1600-100 User Manual
Page 117
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
E01-11024
NOTES: 1. Depress only the key(s) for the required status change(s). [RTN MDSE}, [TX 1/M],
[TX2/MJ, iTXS/Mi, [SniMJ, ISI2/M], and [FS/MJ keys will function to reverse from the
curreni siafus to the other.
2.
For the name of each c/eparf/neni, a maximum of 10 repti/ar-sized or 5 double-sized
characiers may be entered. A combination of both types is also ai^a/7abfe. If no name
is programmed for a department, the Department No. (ex. “DPOI") will be printed on
the receipt and reports as the Department name.
3. If only a deparimerii name is set or cPanged, refer to the following operation sequence.
3 [@/FORl~i,—► ([SHIFT]) [DP] ---------------- ► Character Entries ----------- ► [ST] -------p> [AT/TL]
i
([SHIFT]) [DP]
—► Character Entries
[ST]
r>
to change the dept’s
for the
name
shifted dept.
Repeatable another dept to change only its name.
- 47