Audio, Power, Programming remote to control audio equipment – RCA P46728 User Manual

Page 44

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

The digital remote control that came

packed with your TV is also capable of

controlling a compatible audio

component.

To program the remote press and hold

the

AUDIO

button and dien enter the

two-digit code number for your brand

of audio equipment.

1. Refer to the chart below to find the

code number that corresponds to

the brand name of your audio

equipment. If more than one

number is listed, you may need to

try each one separately to find the

one that works.

-Programming Remote to Control Audio Equipment

2. Press and hold

AUDIO

button

on remote (depending on which

button you want to program).

3. Press two number buttons (first

one, then the other) to enter the

code number for your brand of

audio equipment.

Note: You must press the two number
buttons while holding the

AUDIO

button.

4. Point the remote at the audio

equipment and press the

POWER

button to test the code number.

• If the right number was entered,

the audio equipment will turn on.

• If the audio equipment does not

react to the remote, repeat steps 1

thru 4 with another code number.

Operating Notes:

After the

AUDIO

button is programmed, the

buttons described below will operate the

basic functions of the audio equipment.

Depending on the age, brand, model, and

type of audio equipment, some models may

not be able to respond to all the function

buttons listed below. You will want to

experiment with each button to determine the

exact function for your component.

• POWER: Press to turn on component.

Press again to turn off. Some components

will turn on automatically when you press

this button.

• VOL: Press to change volume level.

• CHAN: Press to select the next higher or

lower channel in the component’s channel

memory.

• Number Buttons: Press two numbers to

directly select a channel.

• PLAY: Press to start component playing.

• PAUSE: Press to pause play or record. To

release pause, press again.

• STOP: Press to stop whatever the

component is doing: playing, recording,

rewinding, etc.

• REW (Rewind): Press while component

is stopped to rewind tape.

• FF (Fast Forward): Press while

component is stopped to fast forward tape.

• REC (Record): Press to start recording.

• ANTENNA: Performs various functions

depending on the type of equipment.

Experiment with this button.

AMP

AM/FM

TAPE

PHONO

AUX

Dimensia

RCA

07,43,44

04,54

Note: Refer to the information sheet packed with your remote control for the latest list of brand
names and code numbers. Because this list of brand names is continually growing, the
information sheet packed with your remote control may be a later version of this list and contain

additional brands and/or code numbers.