RCA P46728 - Manual (Page 27)

Your TV has two separate antenna
inputs on the back (labeled AA/T
A
and ANT B) that allow you to connect
two different signal sources if
desired. For example, you can
connect a cable-TV system to one
input and a home antenna to the other
input.
By changing the
ANTENNA: A/B
display in the SETUP menu, you can
switch back and forth between the
two signal sources.
Listed below are some other common
uses of the two antenna inputs:
• connecting a cable-TV system (or
antenna) to one input and a VCR to the
other.
• connecting a cable-TV system (or
antenna) to one input and a video game
to the other.
• connecting a double-trunk cable
system to both inputs.
• connecting a cable-TV
conveiter/decoder box that scrambles
only premium chaimels. Connection
details are on pages 31-32.
• connecting a cable-TV system to one
input and an antenna (VHF/UHF) to
the other. This allows you to tune in
local stations that are not included on
your cable system. Remember to
change the
CABLE/AIR
function as
described on page 18 if using your set
like this.
The Channel Memory is the list of
channels yoiu: TV will stop on when
you press the
CHAN
up or down
buttons. Your TV provides two
separate Channel Memories-one for
ANT A
input and one for
ANT B
input. This allows you to add or
delete channels into each channel
memory as desired.
When you use \h& AUTOPROGRAM
function, the TV automatically
checks both inputs and sets up a
separate channel memory for each.
Changing Antenna Input
(with remote)----------------------------
1. Press the
ANTENNA
button on the
remote control to switch from the
ANT A
input to the
ANT B
input.
The color of the channel numbers
will change from blue to yellow to
let you know you are now watching
whatever signal is connected to the
ANT B jack on the back of tiie TV.
2. Press the ANTENNA button again to
switch back to
ANT A.
The color of
the channel numbers will change
back to blue to let you know you are
now watching whatever signal
source is connected to the
ANT A
jack.
1. Repeatedly press
MENU
to select
SETUP MENU
and then press +
or - to display semp functions.
Repeatedly press
Menu
to select
ANTENNA: A/B
function.
P (without remote)-----------------------
2. Press the - or + button to change
the setting. The screen display
will change from A to B to let you
know you are now watdiing
whatever signal is connected to
the
ANT B
jack on the back of the
TV. The color of the channel
numbers will change from blue to
yellow.
BSg. ’ .fg-
3. Press the - or + button again to
switch back to
ANT A.
The screen
display will change back to
ANTENNA: A
to let you know you
are now watching whatever signal
source is connected to the
ANT A
jack on the back of the TV.
25