RCA P46728 - Manual (Page 19)

Your TV includes a feature called
SRS (•)* (Sound Retrieval System)
which brings dimensional realism to
both stereo and mono broadcasts.
When the
SRS ON/OFF
function is set
to
ON
and the
STEREO/SAP
function
is set to
STEREO,
your TV
electronically increases the audio
separation of the speakers so you can
perceive a more spacious stereo sound
effect. If a stereo signal is not present,
you can set the SRS ON/OFF function
to its SYNTH STEREO setting to
synthesize and process the mono
signal. '
When the
SRS ON/OFF
function is set
to
ON,
you can also change the next
menu item called
SRS WIDTH
between
NORMJYL ox ENHANCED.
When this
function is set to
ENHANCED,
the
perceived audio separation will be
greater. Try both settings and select
the one you prefer for your room
acoustics.
Note: Some material (audio) will be
more affected than others.
SRS (•) allows you to hear multiple
sound sources. Audio frequencies are
processed to estabhsh directional cues
which gives the impression that sound
is coming from all parts of the room.
External speakers are not required, but
the addition of high quality external
speakers optimizes the sound
performance of your TV.
* SRS, Sound Retrieval System, and the SRS logo (•) are
registered trademarks of SRS Labs, Inc.
i-TUming On SRS (•)-----------------------
1. Repeatedly press the
MENU'PROG
button to select AUDIO MENU, press
+, and then repeatedly press
MENU»PROG
again to select
SRS
ON/OFF
function.
Bass I—
BihnrÁV^: . .
sStfflEoMftR^'Stereo J -
Note: You can also change the
SR5.-OY/OFF function between
ON and
OFF without going through the menu by
pressing the SRS button on the remote.
2. Repeatedly press the + button to
change the setting between
OFF,
ON, and SYNTH STEREO.
^
A * i
I , .....
3. Press MENU'PROG button to select
next menu item called
SRS WIDTH.
Pressing + or — wDl change the
setting between NORMAL and
ENHANCED.
Try both settings and
select the one you prefer.
tA:, j ■j -
rr-olo I - +
• If the broadcast you are receiving is
stereo audio, select
ON.
The
STEREO/SAP function must be set
to STEREO before you can hear
SRS
(•) sound with this setting.
• If the broadcast you are receiving is
mono audio, select
SYNTH
STEREO.
• If you do not want
SRS
(•), select
OFF.
Note: After turning SRS or synthetic
stereo on, you may find it desirable to
readjust the VOLUME, BASS, and
TREBLE
controls to optimize the sound.
The SRS effect, tonal balance, and
volume level will vary fixim channel to
channel depending on the production
qualities of the programtnaterial.
17