RCA P46728 User Manual

Page 39

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

'fhe digital remote control that came packed with your TV

controls your TV

and

up to two compatible RCA VCRs.

To control a compatible RCA VCR, first press the

VCRl

VCR2»ID

button to put the remote in the “VCR mode”. The

buttons shown below will then control the VCR.

Selected models of RCA VCRs have a switch that lets you

determine which VCR will be controlled by the

VCRl

button.

and which VCR by the

VCR2»LD

button. Other models have an

on-screen menu that lets you determine if it will be controlled by

VCRl

VCR2‘LD.

Additional information about controlling

two RCA VCRs is in the note on the next page.

If you have another brand of VCR, you can probably also

program your remote to control it. Details are on the next page.

Notes:

• The six VCR buttons grouped together

(PLAY, PAUSE, STOP, REW,

FF,

and

REC)

control the VCR even if the remote is in the “TV

Mode”.

• The

ANTENNA, MENU-PROG, CLEAR,

and

DISPLAY

buttons are for

RCA VCRs only.

VCRl

and

VCR2*LD

Buttons

• Press to turn on VCR and put remote in “VCR Mode”.

• Press the 7Y button to put remote back into “TV Mode”.

POWER

Button

Press to turn off VCR.

REW

(Rewind) Button

• Press while VCR is stopped to rewind tape.

• Press while VCR is playing to search backward.

PLAY

Button

Press to start tape playing.

(Fast Forward) Button

• Press while VCR is stopped to fast forward tape.

• Press while VCR is playing to search forward.

REC

(Record) Button

Press to record.

STOP Button

Press to stop whatever VCR is doing: Playing, Recording,

Rewinding, or Fast Forwarding.

P4C/SF Button

• Press to pause play or record mode.

• Press again to release pause.

DISPLAY

Button

Press to bring VCR’s displays to TV screen.

CLLAN

(Channel) Buttons

Press to select the next higher or lower channel in VCR channel
memory.

Number Buttons

• Press two numbers to select channel.

• Press a “0” before a single-digit channel number.

CLEAR

Button

Used when setting the VCR’s clock and timer.

MENVPROG

Button

Used when setting the clock and programming the timer.

ANTENNA

Button

Same as

VCR

TV/VCR

button on front of VCR.