Menu*prog, Setup menu, Menu^prog – RCA P46728 User Manual

Page 20

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

is-EmM

1. Repeatedly press

MENU*PROG

to select

SETUP

MENU

and then press + or - to display the setup

menu.

Repeatedly

press

MENU^PROG

to select

function, then

press + or - to

adjust it.

The setup menu will automatically disappear

from the screen if you do not press + or -

within a few seconds.

Via remote control, your TV will “remember”

which function you displayed last-even after the

menu has disappeared from the screen. So, if you

want to adjust the same function again, simply

press the + or - button on the remote control.

The last function you adjusted will appear on the

TV screen.

The

CAPTIONING

feature lets you display as text on the screen the audio

portion of certain programs encoded with the Closed Captioning (CC)

information. Two types of closed captioning are available: Captions 1 and

Captions 2. Select Captions 1 for full translation of the primary language in

your area. Captions 2 is used for an alternate service, such as secondary

language translation or simplified English. Two Text modes ate also

supported.

By setting the

SLEEP TIMER,

you can program your TV to turn itself off

after a certain period of time. This is useful whenever you want to watch TV

for an hour or so before going to sleep. Press the + or - button to select the

length of time you want the TV to stay on.

You can program your TV to turn on and/or off at the times you choose by

setting

\ht ALARM

function,

CHAN LABEL

lets you program names (or labels) for the channel numbers.

The names you select will then appear on the screen whenever the channel

number is displayed.

^ The

PARENTAL CONTROL

feature lets you lock out any channels between 1

‘ and 99 that you don’t want your children to watch. Pressing + or - switches

j. ^ . this function from

OFF

ON.

When this function is set to

ON,

channels

' that have been locked out with the

CHAN CTRL

function cannot be viewed.

2 When this function is set to

OFF,

all channels can be viewed.

I The

CHAN CTRL

(Channel Control) function works hand-in-hand with the

PARENTAL CONTROL

function. It lets you select the channels you want to

lock out. First select the channel number you want to lock out and then

press + to change this function from

NORMAL

LOCKED.

When the

PARENTAL CONTROL

function is set to

ON,

the channels you locked with

this function cannot be viewed.

When you press + or - to start the

A UTOPROGRAM

function, the TV will

automatically cycle through all channels and place the active channels for

your area in its channel memory. Pressing the

CHANNEL

up or down

buttons will then allow you to scan only active channels.

The

CHAN MEM

function allows you to erase and add channels to channel

memory as desired.

Because your TV has two separate antenna inputs on the back labeled

ANT A

and-AiVr

you can connect two different signal sources, if desired.

By pressing + to change the

ANTENNA

function, you can switch back and

forth between the two signal sources. Each time you press +, the antenna

input will change.

The

CABLE/AIR

function tells your TV whether you have a cable-TV system

or a home antenna connected to the TV. Your TV is so automatic that you

will probably never need to change this function. When your TV

autoprograms, it automatically adjusts the

CABLE/AIR

setting for you. If

you should ever need to override the automatic setting, press + or - to
change it.

The

VCR 1 CHAN

function lets you program to which channel the TV will

automatically tune when you press the

VCR 1

button on the remote.

The

VCR 2 CHAN

function lets you program to which channel the TV will

automatically tune when you press the

VCR 2

button on the remote.

The

CABLE CHAN

function lets you program to which channel the TV will

automatically tune when you press

theDSS’CABLE

button.on the remote.

After you set the clock, you will be able to see the on-screen time display

whenever you change channels or press

the DISPLAY

or TV button on the

remote control. To set the clock when this function is selected, first press

and hold - to set the correct hour (including AM and PM). Then press and

hold + to set the correct minutes.