RCA P46728 User Manual

Page 29

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

The

CABLE CHAN

function lets you

program to which channel the TV

will automatically tune when you

press the

SAT»CABLE

button on the

remote. This is handy if you want to

connect a satellite receiver or other

satellite receiver, or if your cable

company requires you to connect a

cable box to your TV. You will no

longer have to remember the output

channel of the RCA DSS® receiver or

cable box because the TV will

remember for you.

For example, if you connect a cable

box to die TV’s

CABLE/ANTENNA

connector (as shown on page 31),

you wiU no longer have to remember

to select channel 2, 3, or 4 on the TV

to see what’s coming from the cable

box. By entering the cable box’s

output channel (usually 02, 03, or 04)

next to the

CABLE CHAN

function,

the TV will automatically tune to that

channel each time you press the

SAT»CABLE

button on the remote.

This function is especially convenient

if you have a remote-controllable

cable box that can be operated by the

SAT‘CABLE

button on the remote (as

described on page 33). Pressing the

SAT»CABLE

button will then not only

switch the remote to cable mode but

will also automatically tune the TV to

the proper channel for viewing the

picture from the cable box.

Setting Up Cable Box Channel (with or without remote)

1. Repeatedly press M£7yi/»P/?pG to

select the

SETUP MENU,

and then

press + or - to display the setup

functions. Repeatedly press

MENU-PROG

to select the

CABLE

CHAN

function.

•

I,:.. =

;7\m0nna:. A ■ 1'r

Cabley^

,.\?CBl'CnajK,

■VCR2Ch‘&tr'

Cable Cnan: Off

2. Enter the channel number you want to

program by pressing two digit buttons

on the remote control. (The chaimel

number you enter is the channel to

which the TV will tune automatically

when you later press the

SAT-CABLE

button on the remote.) The TV will

change to the channel you select.

This will help you to confirm that it is

indeed the channel you want the TV

to automatically tune. Most cable

boxes output their signals on either

channel 02, 03, or 04.

3. Press the + button to program the

channel number you selected into

the

CABLE

CHAV function memory.

Note: Pressing the - button here will

turn off this feature and display

CABLE CHAN: OFF

again.