RCA P46728 - Manual (Page 13)

MUTE Button
• Press MUTE to quickly reduce sound to minimum level without
affecting the picture. This is especMy useful during telephone calls
or other interruptions. ,
• When the sound is muted, the word ML/TE will be displayed on the
screen.
• To restore sound, press MUTE again or press VOL up.
PREV CH (Previous Channel) Button
• Pressing the PREV CH button causes the TV to change back to the
last tuned channel. This is useful should you want to monitor two
channels.
• To operate, select the first channel you wish to watch. Then select
the other channel by pressing two number buttons (for example,
press 0 then 6 for channel 6). The TV will now change back and
forth between the two channels each time you press the
PREV CH
button.
Number Buttons (0-9)
• These buttons let you directly access any channel number-even if the
channel is not in the channel memory.
• To select a channel, press two number buttons (first one, then the
other). For example, press 0 then 6 for channel 6. Press 1 then 3 for
channel 13.
• To select a 3-digit cable channel (like 127), press and hold number
button 1 until 1— appears on the screen. Then press the other two
numbers.
Note: Your TV will tune up to channel 128. Check with your cable
company to determine which channels are available in your area.
7A7>t/r Button
• Lets you quickly view signals fiom the INPUT jacks. Pressing this
button switches the TV from its current chaimel directly to chaimel
90, then chaimel 91, then chaimel 92.
• Channel 90 lets you see the signals coming from a device that is
connected to the S-VIDEO connector. Channel 91 accesses the
INPUT I jacks and channel 92 accesses the INPUT 2 jacks.
CLEAR Button
• Pressing CLEAR clears the screen of aU on-screen display messages
except
MUTE
and
PARENTAL CONTROL
RESET ~R\iWiaa
• Press RESET to return the picture adjustments to the original
settings.
MENU»PROG Button and -/+ Buttons
• Press MENU'PROG repeatedly until the menu you want to display is
selected, then press + or -. Next press MENU*PROG repeatedly to
select the function you want to adjust and then press + or - to adjust
the setting. Details about using each function begin on page 14.
Arrow Buttons
• Pressing the arrow -/+ buttons lets you adjust functions in the menu
system.
Picture-in-Picture Buttons
• Press PIP to activate the picture-in-picture feature.
• Press PIP again to deactivate the picture-in-picture feature.
• Press FREEZE to freeze the small picture.
• Press MOVE PIP to move the small picture to the next comer.
• Press SWAP to switch the small picture with the large picture.
• Details arc on pages 12-13.
S/iS (•)* Button
• Press repeatedly to change settings of SRS (•) function (Sound
Retrieval System).
• Details are on pages 16-17.
• SRS, Sound Retrieval System, and the SRS logo (•) are registered trademaiks of SRS
L^s, Inc.
ANTENNA Button
• Because your TV has two different antenna inputs on the back
(labeled ANT A and ANT B) you can connect more than one antenna
or signal source. Press the ANTENNA button to switch from one
input to the other.
• The color of the channel numbers on the screen indicates which
antenna input you are watching. The channel numbers are blue for
ANT A and yellow for ANT B. If the channel numbers are blue, you
are watching whatever is connected to the ANTENNA A input on the
back of your TV. If the channel numbers are yellow, you are
watching whatever is connected to the ANTB input on the back of
the TV. Details are on page 25.
11