Icd^t»oning:)5o^®^5 – RCA P46728 User Manual

Page 24

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

The labeling feature lets you program

names (or labels) for the channel

numbers. The name you program

will then appear on the screen below

the channel number whenever the

channel number is displayed.

Each name can contain up to four

characters, and you’ll be able to

assign up to 64 names. After 64

names or labels have been entered,

the TV will display this message to

let you know no more channels can

be labeled:

CHAN LABEL: FULL.

Listed below are the letters and

characters from which you’ll be able

to choose when programming the

channel labels:

A B C D E F G H I J K L M
N O P Q R S T U V W X Y Z
(blank space) ! ' # $ % & ' ( )

a + . - . / O 1 2 3 4 5 6 7 8 9 : ;

< = > ? @

You must use your remote control to

create or erase labels.

Labeling Channels (with remote only)

1. Repeatedly press

MENU’PROG

select

SETUP MENU,

and then press

+ or - to display setup functions.

Repeatedly press

MENU’PROG

select

CHAN LABEL

function.

: •

;

-iAuätfMei^

Setup Menu

Press + to enter the

CHAN LABEL

function. Four blank letter frames

will appear under the channel number.

■icd^t»oning:)5o^®^5' - ^' ’

■‘SleepTffherSttpOj^'-L, ,

Chan Labe! Use Vo!

;-Parental

;

3. Select the channel number you want

to label by pressing the

CHAN

up or

down button (or by pressing two

number buttons).

12:08 PM

4. Press and hold the

VOL

up or down

button until the letter or character you

want appears on the screen. Pressing ,

VOL

up sequences through the

characters in alphabetical order.

Pressing

VOL

down sequences the

letters in reverse order.

5. Then press + to move to the next

letter frame. Pressing - moves you

back to the previous letter frame.

■

Repeat steps 4 and 5 until the name

is complete. You can now label

another channel, if desired, by

selecting the channel number and

repeating steps 4 and 5.

7. When finished, the display will

automatically disappear from the

screen in a few seconds. Your

labels will remain in memory until

you erase them. They are not

affected by power failures.

Erasing Labels

To erase a chaimel label, first follow

steps 1,2, and 3 above, and then press

CLEAR

on the remote control.

Note: Autoprogramming new channels
into the channel memory does not affect
the channel labels that are already entered.