Kenwood 1080VR - Manual (Page 7)

- V5-
Names and functions ofpar^
1080VR (En/K)
b
O POWER key ~:X
Use to turn the receiver on and off.
Use ^n corinbination with the input selector
lAUDlC, VIDEO, or TV.i keys and SHIFT key
to tj'Ti various components on and off.
© MACRO key
Use in combination with the AUDIO,
VIDEO, or TV keys to execute a senes of
commanas automatically (MACRO PLAYI
© VIDEO selector key
Selects the yioeo inputs /VIDEO 1, VIDEO
2, VIDEO 3. AV AUXl and sets the remote
to operate the component registered at
the respective input
O Multi control keys ~3k
Use to operate the selected component
and to operate the on-screen display,
© REC key
Use to operate the selected component
0 TUNING/SKIP key -¿1 - jC
Use during the setup procedure to specify
various settings. Use to operate the tuner
or selected component.
© SUBWOOFER key ~a£
Use in combination with the VOLUME +/-
keys to adjust the volume of the subwoofer.
© FUNCTION SHIFT key
Use in combination with the numeric keys
to execute alternate commands.
O Numeric keys -ul£
Provide functions identical to those of the
originahremote supplied with the compo­
nent you are controlling.
To access the functions printed above the
keys. Press within 3 seconds of pressing
the FUNCTION SHIFT key. Function avail­
ability varies for each component.
© SHIFT key
Use in combination with the AUDIO and
VIDEO keys to change the remote control
mode without changing the input selector
or in combination with the POWER key to
turn on and off components programmed
into the remote.
® TV selector key
Sets the remote to operate a TV or cable
box (TV 1, TV 2, CABLE). This key does not
change the input selector on the receiver.
© AUDIO selector key -l3C.
Selects the audio inputs (CD, TAPE/MD.
TUNER, PHONO) and sets the remote to
operate the respective KENWOOD audio
component.
If you connect audio components from
KENWOOD and other makers to the TAPE/
MD or CD jacks, you can set the remote to
operate these components by registering
the appropriate setup code at the respec­
tive input.
© GUIDE key
Use to activate the OSD menu functions of
registered components.
© VOLUME key -I j C
Use to adjust the receiver volume.
© MUTE key - ij I j
Use to temporarily mute the sound.
© SOUND key -BT
Use to activate the Sound OSD and set the
remote to OSD control mode.
© LISTEN MODE key
Use to select the desired surround mode.
© SETUP key
Use to activate the Setup OSD and set the
remote to OSD control mode.