Kenwood 1080VR - Manual (Page 62)

- .................................................................................................................... ............................................... .. ■
nnteonRmtionnf other nomnnnenis ate operation onents
1080VR (En/K)
Refer to the following for the type of remote control operations available for each component.
The setup code for each component must be entered beforehand.
O Use the AUDIO. VIDEO, or TV keys to select the component
you want to control.
Q Press the keys corresponding to the operations you desire.
Refer to the following sections for details.
• When pressing keys in succession, press each key firmly and be sure
to wait at least 1 second before pressing the next key.
• Numeric keys function the same as the numeric keys on the original
remote.
•To execute a FUNCTION SHIFT command, press the FUNCTION
SHIFT key, then press the corresponding key within 3 seconds.
1. Although each setup code is designed to work with a number of different models, certain codes may not work with some models. (Also,
certain codes may only operate some of the functions available on a given model.)
2. The charts below show the typical functions available for each component. Some manufacturers use different key combinations to perform
similar functions. For that reason, we have programmed extra functions on some of the unused number keys to. help you control your
equipment. To find if your component has extra functions, press the FUNCTION SHIFT key, then press a number key. Repeat this procedure
for each number key.