Kenwood 1080VR - Manual (Page 47)

Getting the most from your remote control .
This operation lets you change the remote control operation
mode without changing the input selector.
You may find this useful when you want to control one
component while using another. (For example, if you want
to rewind the tape deck while listening to a CD.)
This operation is also useful if you don't know the which
mode the remote control is set to. Executing this operation
allows you to change or reconfirm the operation mode you
desire.
Keys or controls used in this operation.
Changing (confimina) the operation mode
Press SHIFT.
• To operate a TV, start from step B.
Go to step 2 within 3 seconds.
Select the component to he controlled.
Press the VIDEO, AUDIO or TV
key repeatedly to display the re­
mote control mode for the com­
ponent you want to control.
AUDIO
VIDEO TV o Q o
Execute the desired operations.
Tl
.11
The component to be controlled is displayed in parenthesis
> Pressing any other keys after the SHIFT key cancels the shift function
and sends the normal code associated with the respective key.
»The input selector does not change during this operation.
• The remote control mode is shown in the on screen display when the
OSD mode is set to ON. -i3E
• If you press VIDEO or AUDIO key more than 3 seconds after pressing
the SHIFT key, the input selector changes together with the operation
mode.
• See "Remote operation of other components" for a list of keys available
with each component. -iJS
The operation mode remains set at the component specified I'f?-
in step 2.
To return control to the original component, press SHIFT and
then press the VIDEO or AUDIO key to return to the original
control mode.