Casio PV-S6100 - Manual (Page 23)

21
Chapter 1 Getting Acquainted
To replace the batteries
Important!
•
Always make sure the battery switch is in the NORMAL OPERATION
position at all times, except when replacing batteries.
1. Turn off PV Unit power.
2. Remove both of the old batteries and replace them with new ones,
referring to the procedure on pages 1 through 3 .
To turn power on and off
1. Touch anywhere on the PV Unit screen or press the center key to turn on
power.
2. To turn power off, tap Off with the stylus.
•
You can disable screen tap power on (so power can be turned on only by
pressing the center key) using the procedure below.
To turn the screen tap power on feature on and off
1. While the Mode Menu or Action Menu is on the display, tap Menu Bar
to display the menu bar, and then tap Option – Screen Options.
2. Tap the check box next to the “Screen tap power on” option to toggle
the option on (checked) and off (unchecked).
• When this feature is on, you can turn on power by touching the PV Unit
screen or by pressing the center key. When off, you can turn on power
only by pressing the center key.
3. Tap Set to register your setting.
•
Replacing batteries or resetting the PV Unit turns on the screen tap power
on feature.