Demonstration mode, Watching the demonstration, Canceling demo mode – Sharp VIEWCAM VL-NZ50U User Manual
Page 70: Loff, 1и^1^л1дй[ии, Loff demo mode
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Appendix
Demonstration Mode
You can watch a brief demonstration of the
special camcorder features in Demo mode.
If the demonstration appears on the screen
when you turn on the camcorder for the first
time, cancel the Demo mode to use your
camcorder.
Note:
• The demonstration is only displayed in English,
Watching the Demonstration
1
Remove the Mini DV cassette from the
camcorder (see page 10).
2
In CAMERA mode, press the MENU
button until the menu screen appears.
3
Press V' or Л on the operation button
to select ETC, then press the SET button.
4
Press V' or Л to select “DEMO MODE”,
then press the SET button.
the SET button.
1и^1^Л1ДЙ[ии:
Canceling Demo Mode
1
During the demonstration, press the
MENU button to pause the demonstra
tion.
2
Press V or A on the operation button
to select ETC, then press the SET button.
3
Press T or A to select “DEMO MODE”,
then press the SET button.
press the SET button.
lOFF
DEMO MODE
5
Press the MENU button to turn otf the
menu screen.
Note:
• The demonstration will pause if you press the
MENU button. If you leave it for 60 seconds, or
turn the power off temporarily and then set the
Power switch to CAMERA, the demonstration wi!
begin again.
ION
Set the Power switch to OFF, then hold
down the Lock button and set the Power
switch to CAMERA.
• The demonstration begins.
57