Inserting a cassette, Tips on recording positions, Holding the camcorder – Sharp VIEWCAM VL-NZ50U User Manual

Page 7: Basic posture, Shooting from a high angle, Shooting from a low angle

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Inserting a Cassette

Attach the power source to the
camcorder, then slide the cassette
compartment door release and open the
cassette compartment door.

• After confirmation sound, the cassette

holder extends and opens automatically.

Insert a commercially available cassette

fully with the window facing outwards,

and with the erasure protect tab facing

upwards.

Erasure protect tab

Press the

nnark gentiy until the

cassette holder clicks into place.

• After confirmation sound, the cassette

holder retracts automatically.

' mark

Wait for the cassette holder to fully

retract. Close the compartment door by
pressing the center until it clicks into
place.

Tips on Recording

Positions

To create images that are easy to watch during

playback, try to record with an upright posture

and steady hand to prevent a shaky image.

Holding the camcorder

Place your right thumb close to the REC

START/STOP button and Power Zoom control.

Place your left thumb on the thumb rest on the
left side of the screen.

Basic posture

Take care not to

cover the lens or

microphone with

your finger.

Shooting from a high angle

Turn the LCD monitor so that the

screen faces downward.

Shooting from a low angle

Turn the LCD monitor so that
the screen faces upward.

V )