Brother FAX-1000 - Manual (Page 7)

PRE-INSTALLATION INSTRUCTIONS
BEFORE REMOVING THE UNIT FROM THE CARTON
The Brother FAX-1000 is designed to operate in an office environment. It is rugged, reliable and
virtually maintenance-free. However, to ensure years of trouble-free performance, please
observe the following precautions;
• Do not locate the unit near heaters, air conditioners, in direct sunlight or in extremely
dusty environments.
Install the unit on a flat level surface, such as a desk, a table, a typewriter or computer
stand.
Do not locate the unit where water or chemicals are likely to splash on it.
Select a vibration-free area of your office.
Locate the unit within 3 feet from a telephone wall jack.
Locate the unit within 3 feet of a standard, grounded outlet.
Avoid plugging in the unit into an outlet which is on the same line as an air conditioner,
a refrigeration unit, a copier, an electric typewriter or any other device that draws a lot of
current in a relatively short period of time.
CONTENTS OF THE PACKING CARTON
The packing carton contains:
1. The Brother FAX-1000 UNIT
2. One roll of thermal recording paper
3. Telephone handset
4. Telephone line cord
5. Owner's Manual
6. Warranty card
7. Test Sheet
8. Original document supporter
9. AC power cord
10. Facsimile supply order form
11. One touch lavel sheet
Note: You can order a RECEIVING CATCH TRAY (optional). Contact your dealer if interested in
ordering this part.
PROCEDURES FOR REMOVING THE UNIT FROM THE PACKING
CARTON
1. Carefully open the carton (see the appropriate inscription on the carton)
2. Pull out the FAX-1000 and the other devices together with the packing trays
3. Remove all packing trays and plastic from the unit
4. Take out the telephone line cord from the plastic packaging
5. Locate and take out the paper roll