beautypg.com

On-hook dialing – Brother FAX-1000 User Manual

Page 18

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

1 3

2. On-hook dialing

Keep the handset on hook.

Press MAN DIAL button. The manual dial lamp will light up.

Dial the other party's number. The display will show the phone number.
Press the START/COPY button. The word "DIALING" will appear in display. When

dialing is complete then the word "CALLING" will appear. The word "CALLING" will
be replaced with the word "SENDING" when connection is made.

NOTE; When performing dialing in facsimile mode as stated above, the unit will automatically
REDIAL twice if no connection is made. If no connection is made after second redial, unit will alarm
and "NO ANSWER SIGNAL" will appear in screen.

3.

Speed-dialing

The procedure for setting up speed dial numbers (up to 64 of them) is described on page 9.

Here, we are concentrating on transmitting documents using speed-dialing. The procedure is as

follows:

Insert the document. The display shows the year, month, date and time and the

words ENTER TEL. NUMBER.

Press the SPD DIAL button. A

A

sign appears on the display.

Press the two-digit code representing the desired telephone number. The

display will show this code next to the

A

symbol. This is then replaced by the

actual preset telephone number represented by the code.

Press the START/COPY button. The word DIALING will appear under the

telephone number.

The rest of the operation is automatic. As the facsimile will complete the
connection and transmit the document, you will see the word CALLING appear
to be replaced by the word SENDING.

NOTE: When performing dialing in facsimile mode as stated above, the unit will automatically
REDIAL twice if no connection is made. If no connection is made after second redial, unit will alarm
and "NO ANSWER SIGNAL" will appear in screen.

4.

One-touch dialing

The procedure for setting up one-touch numbers (up to 16 of them) is described on page 9.
The actual transmission procedure is:

Insert the document. The display shows the year, month, date and time and the

words ENTER TEL. NUMBER.

Press the letter, number or symbol representing the desired telephone number.

The display will show character. This is then replaced by the actual preset
telephone number represented by the code.

The word DIALING will appear under the telephone number, to be replaced by

the word CALLING and then SENDING.

NOTE; When performing dialing in facsimile mode as stated above, the unit will automatically
REDIAL twice if no connection is made. If no connection is made after second redial, unit will alarm
and "NO ANSWER SIGNAL" will appear in screen.

If a "comment" was registered in the RECEIVING station, the comment will appear on the display of

your facsimile unit. This comment is the message from the receiving station.