Brother FAX-1000 - Manual (Page 19)

C. Transmitting multi-page documents
The FAX-1000 document feeder holds up to ten (10) pages. To transmit a multi-page document,
simply insert the pages (up to 10) into the feeder face up, select the appropriate method of dialing
and all ten pages will be transmitted one after another, starting with the top page. You may add
additional pages by inserting them behind the last page in the feeder.
To stop the transmission, simply remove the feeder pages which have not yet been transmitted
and push the STOP button.
D. Header transmission
When transmitted to a G3 unit, your documents will have a message printed at the top of the page.
This header lists the year, month, date and time of the transmission, your telephone number, the
name of your organization (or any other type of information), the serial number and the page
number. The header can be erased, when desired by turning the header off in SET UP 1.
E. Delayed transmission
The FAX-1000 is capable of delayed transmission using a timer. The procedure for setting up
delayed transmission is as follows:
1. Insert the document and press the MODE button three (3) times. The display
will read DELAYED TX 0:OFF 1 :ON.
2. Press "1" to select delayed transmission. The display will read DELAYED TX
TIME.
3. Bearing in mind that the unit utilizes a 24-hour clock, set the time by simply
pressing the appropriate numbers. These will appear in the display. Press >ieto
set.
1 4
4. Dial in the other party's phone number using any of the four methods shown
above. After you've made sure that you have the right number, press H«. The
display will show the telephone number and DELAYED TX with the desired time.
The unit will initiate the transmission at the desired time automatically.
NOTE; When performing dialing in facsimile mode as stated above, the unit will automatically
REDIAL twice if no connection is made. If no connection is made after second redial, unit will alarm
and "NO ANSWER SIGNAL" will appear in screen.