I. the copy mode, Operating the unit – Brother FAX-1000 User Manual
Page 16
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
1 1
OPERATING THE UNIT
I.
THE COPY MODE
The easiest way to start using the unit is to try out the COPY MODE. To make a copy, follow the
simple instructions below:
1.
Make sure the unit is plugged in and that the unit has paper inside of it.
The DISPLAY will show the year, month, day and time and the word READY.
2.
Insert the document you wish to copy into the guide of the unit, as shown in
the diagram above. The edges of the guide should be adjusted to fit the
document. The text should be FACING you.
3.
Press the START/COPY button on the front panel.
As soon as you press the START/COPY button, the unit will start pulling the
document through the scanning area and you will see it begin to emerge at the
bottom of the unit.
4.
When the unit completes copying the document, the original will be completely
free of the unit. The copy will be cut automatically.
NOTE: HALF TONE and FINE modes are set automatically while the FAX-1000 is functioning as a
copier. For additional information about these modes, see below.