Brother X L 2010 User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Stitch length dial
Reverse
sewing
button
Foot controller
Sew-light
Depending on the stitch select
ed, you may need to adjust the
stitch length.
The numbers marked on the dial
represent the stitch length.
THE HIGHER THE NUMRER, THE
LONGER THE STiTCH.
The ‘‘O” means the material does
not feed.
The area is used for making a
SATIN stitch (closed stitch) for
buttonhole
and
decorative
stitches.
To sew in reverse, push the
button as far as it goes. Hold the
button in this position until you
wish to sew forward. When the
button is released, it will spring
back in original position and the
machine will sew forward. Re
verse sewing is used for back-
tacking
and
reinforcement
of
seams.
When the foot controller is de
pressed lightly, the machine will
run at a low speed.
When the pressure on the foot
controller is increased, the ma
chine will pick up the speed.
When the foot controller is re
leased, the machine will stop.
Care should be taken that noth
ing is placed on the foot control
ler when the machine is not in
use.
To turn the sew-light on or off,
push the sew-light switch.