Brother X L 2010 User Manual
Page 17
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
How
to
Finish
Your
Sowing
Projsct
Reverse stitching is used to lock
the threads at the end of the
seam or wherever reinforcement
is needed.
1, This is done by stitching to
the end of the seam. Then
stop.
2. Push the Reverse Sewing But
ton and stitch backward for
3/8 inch (10 mm) from end of
the seam fabric.
How to Remove from Machine
1. Stop the machine.
2. Raise the needle to its highest
position and make sure that
the thread take-up lever is
also in the highest position.
3. Lift the presser foot and pull
out the fabric gently to the left
side.
4.
Cut both threads by the
thread
cutter
equipped
with
the machine.
5. To prepare the machine for
the next seam, pull 4 inches
(10 cm) of thread between the
toe of the presser foot toward
the back of the machine.
Top Stitching atKf Stretch Mate
rials
No. 1 (Left needle position) is
used for Top stitching and sew
ing light weight fabrics.
No. 3 (Stretch Straight Stitch) is
for stretchable fabrics.
14