Brother X L 2010 - Manual (Page 23)

PROCEDURE OF MAKING BUTTONHOLE
Stop
Step A
(Front
end of
bar
tack)
StepB
(Left
side
row)
StepC
(Back
end of
bar
tack)
StepD
(Right
side
row)
Sowing
Pattorn How to sow
1. Set the pattern at A.
2
. Lower presser foot and sew 5
to 6 stitches.
3. Stop machine and raise needle
from the material.
I 1. Turn the pattern selector and
I
set at B.
I 2. Sew predetermined length,
j 3. Stop machine and raise the
needle.
1. Turn the selector and set at C
(same position as A).
2. Sew 5 to 6 stitches.
3. Stop machine and raise the
needle.
1. Set at 0.
2. Sew the right side row until the
needle reaches position D.
HOW TO SECURE STITCHING
AND CUT MATERIAL FOR BUT­
TONHOLE.
1. To secure stitching, turn the
material 90 degrees counter­
clockwise
and sew 5-6
straight stitches.
2. Remove the material from the
machine. Cut opening in but­
tonhole with seam ripper tool.
Care should be taken not to
cut through any stitching.
3. It is recommended that pins
are placed across both ends
of buttonhole as a protection
against cutting bar tack stitch­
ing.
20