Stitch length 2-3, Foot, Zipper foot – Brother X L 2010 User Manual

Page 25: Using attachments and appucations, Zipper insertion

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Text mode
Original mode

USING ATTACHMENTS AND APPUCATIONS

Zipper insertion ;______

Stitch Length

2-3

Foot____

Zipper Foot

Zipper foot is used to sew vari
ous types of zippers and can
easily be positioned to right or
left side of needle. When zipper
is sewn at right side of the nee
dle, place the zipper foot by
loosening thumb screw and slid
ing zipper foot to the left.

When the zipper is sewn at left
side of needle, place the zipper

foot by loosening thumb screw

and sliding zipper foot to the
right.

1. Lower needle into side notch

located on the presser foot
(right or left).

2. Tighten the thumb screw to

lock presser foot into position.

3. To sew opposite side of zip

per loosen thumb screw and
place the zipper foot (right or
left.)