Brother X L 2010 - Manual (Page 13)

To draw up lower thread
1. Rai«s the needle and the
presser foot to the highest
position. With left hand, hold
the end of upper thread and
with right hand, turn baiance
wheel toward you until the
needle moves down and up
again to its highest position.
2 . The upper thread has caught 3. Pull about 4 inches (10 cm) of
the lower thread in a loop.
Pull the upper thread toward
you and the lower thread will
come up from the bobbin in a
large loop.
thread under the toe of the
presser foot toward the back
of the machine.
10