3 (stretch straight stitch), Straight and zigzag stitching straight stitch – Brother X L 2010 User Manual
Page 16
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
13
STRAIGHT AND ZIGZAG STITCHING
Straight stitch
Pattorn
Stitch Length
1 (Left needle position)
1-4
2
(Center needle position)
3 (Stretch Straight Stitch)
How to Start Sowing
1. Raise the needle to its highest
position and lift the presser
foot.
2
.
Pull up the lower thread by
turning
the
balance
wheel
toward you and pull both up'
per and lower thread to the
back of presser foot.
3. Place fabric under the presser
foot and position needle 5/8
inch (10 mm) beyond fabric
edge.
4. Lower the presser foot.
5. To back tack, push the Re
verse Sewing Button as far as
it goes. Reserve sewing is
used for locking end of seam
and where reinforcement is
needed.
6. Release the Reverse Sewing
Bunon and start sewing in
forward direction.
How to Change Sewing Direc>
lion
1. Stop the machine at the turn
ing point while the needle is in
the fabric.
2
.
Raise the presser foot and
turn the fabric to its new di
rection while the needle acts
as the axis.
3. Lower the presser foot and
start sewing in new direction.