Pattern dial, Darning, Applique – Brother X L 2010 User Manual

Page 26

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Darning

! Pattern Dial

r 2 ^

Stitch

Length

fikny

position

Others

Darning Plate

1. Set the darning plate on the

needle plate as illustrated.

2. Place portion to be darned

under the presser foot to
gether with fabric underlav for

reinforcement.

3. Lower the presser foot.

Sew alternately drawing the

work gentty away from you

and pulling it toward you.

5. Repeat this motion until the

portion to be darned is filled
with parallel lines of stitching.

Applique

Pattern

Stitch Lanoth

4 or 5 or 6

F-2

1. Baste the cut design to the

fabric.

2. Sew carefully around the

edge of the cutout design.

3. Cut away surplus fabric out

side of stitching.

4. Remove basting.

NOTE:

Make reinforcement

straight stitches at be
ginning and the end of
the stitches.